Stainless Steel Water Tank Installation - Queensland

The Stainless Water Tanks installation team will start with any site preparation that is required prior to laying the concrete slab. Each concrete slab is steel reinforced and the tank is positioned once the slab has reached its optimum strength. At Stainless Water Steel Tanks, our plumbers use only the highest quality connections, accessories and pumps, whilst ensuring all pipes are fastened properly to weather any storm, as this is a vital part of the process. Our final quality check of the installation will give you peace of mind. Optional Extras We are pleased to be able to offer you the following extras: Pumps Filters On tanks bigger than 2.5 metres in diameter the centre stay is food grade poly, which can be upgraded to stainless steel Additional outlets, up to 50mm (standard is 25mm) Bucket tap (additional outlet 500mm up with tap) Additional overflow 90mm or 100mm Electronic level gauge
The Dry System
The Dry System: This is the most common system and involves overhead pipes connected to your gutters feeding into your water tank. This system is called a dry water tank system as the feed pipes run dry after the rain has stopped. With this water system the main consideration is to ensure the tank height is low enough to allow fall into the tank and that the overhead pipework is well supported.
The Wet System
The Wet System: Used for years in the country, this system enables the water tank to be positioned away from the water collection source and uses the principle that water will always be level.  As the line fills and builds up the water will then spill into the tank. When the rain stops, water will remain in the pipework and therefore it is called a wet system. When installing this kind of water system we ensure mosquito protection and pre-filtering of the water before it enters the charged system to keep the pipes clear.
Stainless Water Tanks   Ph: 07 3869 0155   Email: sales@stainlesswatertanks.com